Silent-call VC4002-2 User Manual download pdf

Installation and operations manual

Vibra - Call Receiver

Model – VC4002-2

General

The new Silent Call Vibra-Call

receiver is a body worn portable alerting device that alerts the user with coded

vibrations I t is used in conjunction with any Silent Call transmitter such as the telephone, doorbell, smoke

detector and/or sound monitor. When this receiver detects a signal from a Silent Call transmitter, it activates its

vibrator with a predetermined output vibration for each type of transmitted signal.

Operation

Turn the Vibra-Call receiver on by moving the power switch to the ON position, to the right when worn on the

belt. When turned on for the first time, the vibrator will pulse continuous short pulses (FIRE) , signaling the last

alarm that was received as this is the factory default test used. These are a couple of the distinguishing features

of the new revised Vibra-Call. Another is the pushbutton used for programming that replaced the dip switch.

Each time the Vibra-Call receives a signal from a Silent Call transmitter with a matching code; the Vibra-Call

receiver will vibrate a particular type pulse. The Vibrator will remain on until the distinguishing pulse pattern

has been completed. Switching the On / Off switch from OFF to ON activates the recall function which will

turn on the vibrator pulses of the last transmitted signal the Vibra-Call received. The Vibra-Call receiver battery

may be tested by moving the power switch momentarily to the TEST position, push to the left when worn on

the belt.

The Vibra-Call receiver is supplied with a rechargeable Nickel Metal Hydride 9V battery. In normal operation,

the unit will function for approximately two to three days per charge. However, for the most reliable operation,

recharge the battery each night when you go to bed by using the Sleep Alert Charger. Also, do not leave the

unit on when you are not using it as the battery can be damaged by running it completely down. Not all “9V”

rechargeable batteries are the same, and we recommend you purchase replacement batteries from Silent Call.

Although it is not recommended, except in an emergency, the Vibra-Call receiver may be operated with a

standard alkaline battery. However, if you use an alkaline battery YOU MUST NEVER ATTEMPT TO

RECHARGE THE BATTERY. Doing so will cause the battery to burst and destroy the Vibra-Call circuitry,

voiding the warranty.

Vibrator Pulse Outputs

SOUND = three short pulses

PHONE = one long pulse

DOOR = two short pulse

WEATHER = one short and one long pulse

FIRE = continuous short pulse

CO = three short pulses and one long pulse

Programming

NOTE:

Your Vibra Call receiver and all transmitters leave the factory already programmed for the factory

default code. The Vibra Call does NOT need to be programmed unless you have changed the code on

your transmitters.

1 2

Summary of Contents

Page 1 - Vibra - Call Receiver

Installation and operations manual Vibra - Call Receiver Model – VC4002-2 General The new Silent Call Vibra-CallM receiver is a body worn portable ale

Page 2 - Limited Warranty

The Silent Call alerting system is digitally coded. Each Silent Call transmitter contains a nine position code switch. Positions 1 through 5 on the tr

Comments to this Manuals

No comments

Silent-call VC4002-2 User Manual

Browse online or download User Manual for Safety Silent-call VC4002-2. Silent Call VC4002-2 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Safety Silent-call VC4002-2